High Movement Capacity Joint Sealant using Sikaflex Construction

Sikaflex Construction

Scope:

Use of one component permanently elastic polyurethane sealant for expansion joint sealing using Sikaflex Construction.
Fields of Application
Sealing vertical and horizontal expansion joints (excluding joints in contact with potable water -using Sikaflex PRO 2HP -or chemicals and floor joints subject to heavy traffic- using Sikaflex PRO 3WF. Please consult SikaTechnical Department)

Materials
Sikaflex Construction (J): 1-component polyurethane based sealant
Sika Primer 3: Primer for Sikaflex applied either on damp or dry substrate.
Materials Consumption
Sikaflex Construction (J): ~100 ml or 130 g/m1 for 10 mm x 10 mm joint size
Sika Primer 3: approx. 5 g/m1 for 10 mm x 10 mm joint size
Joint Configuration
Movement Capacity = ~25 % of average joint width
Width : depth ratio = 1 : 1 (for joint width up to 10 mm)
Width : depth ratio = 2 : 1 (for joint width more than 10 mm)
Min. width of joint = 10 mm
Colors
Sikaflex Construction is available in two colors: grey and white
Tools:
Apply Sikaflex Construction using caulking gun, apply Sika Primer 3 by brush. Trowel or spatula can be used for surface finishing.