Concrete Curing Compound
Scope of work
Application of curing compound onto fresh concrete surface
General purpose of curing compounds for fresh concrete
• To form a film covering the surface of concrete to prevent premature water loss due to evaporation
• Allow the concrete to cure with complete hydration of cement and achieve maximum properties.
Materials available for concrete curing
ANTISOL E
- Emulsified paraffin based curing compound.
- Ready to use
- Very effective particularly on horizontal surfaces even subject to windy and sunny conditions
- Shall be removed prior application of subsequent surface treatment
ANTISOL S
- Aqueous concrete curing silicate solution
- Ready to use
- Particularly used for the treatment of vertical concrete surface
- Does not impair adhesion of subsequent treatments to concrete surface (when applied within recommended dosage rates)
Concrete Curing Compound Application procedure
Please consult our product technical data sheets for full application recommendations.
- Applicable by spray.
- Typical Consumption rate: 0.2 to 0.25 litre of Antisol E or Antisol S per m2.
- Protect fresh coat from rain
Loading
Did you enjoy this post? Why not subscribe to my feed and get articles like this delivered automatically to your feed reader.
